Premaxcell::FWT

Siemens-TC35i Module (W/SMDR)

Premaxcell GSM FWT

Cell Socket GSM FWT

 

 

 

Premaxcell is a fixed wireless terminal (FWT,FCT) that provide a voice interface between PBX / PABX landline and GSM/CDMA network, the fixed wireless terminal (FWT, also known as fixed cellular

terminal, fixed cellular unit) enables users to get connected to GSM/CDMA network with general phone sets. In weak reception area, it works better than mobiles. Premaxcell Fixed Wireless Terminal (FWT)

is the best solution for office use and call shop. We use new industrial  module in our FWT to improve highest quality and reliability for using our products. The Premaxcell FWT is the entry level terminal for

(voice only) applications and the first choice for Least Cost Routing using a PABX.

Premaxcell::Fixed Wireless Terminal (FWT) TECHNICAL SPECIFICATIONS:
1. Working Frequency: GSM 900 / 1800MHz or CDMA Network(800MHz)
2. Supports GSM phase2 standard CDMA (800MHz)
3. Power supply: 100-240V / 50Hz
4. Environment temperature: -10C-40C
5. Humidity: 10% -95% (non-condensing)
6. Noise: < 60db
7. Atmospheric pressure: 86kPa-106kPa

Fixed Wireless Terminal (FWT) :: KEY FEATURES:
1. Good performance guaranteed by using Wavecom GSM/CDMA industrial module.
2. Built-in rechargeable backup battery with 10 hours of standby time
3. Polarity Reverse for Call Metering.
4. Support both of the GSM / PSTN or CDMA / PSTN
5. Automatic call route through GSM or PSTN according pre-programmed prefix numbers.
6. The FWT increases the GSM/CDMA traffic by providing fixed line services over the GSM/CDMA.
7. Programming table for 40 restricted numbers to be dialled from GSM/CDMA or PSTN.
8. Support PBX Systems.
9. FSK Caller ID.
10. Setting IP number for both of GSM/CDMA and PSTN.
11. High Gain Antenna.
12. Clear voice and with high volume.
13. The FWT provides an alternative route of access to speech communications when no fixed infrastructure is available or when an additional line to the one(s) already existing is required.

Fixed Wireless Terminal (FWT) :: Interface:
Telephone: 2 RJ11 (a / b 2-wire line)
GSM/CDMA Antenna: SMA plug-female
SIM card: Small plug-in card, 3V or 5V type

Fixed Wireless Terminal (FWT) :: Typical Application

Ideal for PABX applications the Premaxcell::Fixed Wireless Terminal (FWT) , is a cost-saving solution for small and medium-size enterprises. Connected to a PABX, the Premaxcell::Fixed Wireless Terminal (FWT) can route outgoing calls to mobile phones

through the GSM/CDMA network. As a result your enterprise can benefit from the extremely low (mobile to mobile) rates offered by most mobile carriers and save dramatically on (office calls to mobiles).
Benefits.